The digital output channels of the HCM-1620 module are arranged into two 8-output groups. Each group has one master relay, which controls the contact voltage for an output during the execution of a command.

All channels are 4 kV isolated.

One module is can be mounted in one 3U bin.

A field termination module with a local/remote switch is integrated in the unit.
The outputs support three stage or also known as controlled output commands.

Onboard contact-weld-monitoring allows secure and reliable operation of high current loads.

With a maximum rating of 10 Ampere at 110 Vdc no interposing module is required for high safety operating requirements in a substation environment.

Using the WebCAN Designer output channel groups can be configured as:

• Controlled Double Stage Output Commands with contact weld monitoring and one-out-of-n output locking

The external panel mount LCD shows all process values and the module status.

Input substitution is supported and the substituted values are displayed.

The fiber optic field-net communication port is a cost effective plastic fiber system compliant with CANOpen standards.

Modules are arranged in a star configuration and can be distributed for up to 50 meters.

Key Features

• 2x8 Digital High Current Output Channels
• 4kV Isolation
• Integrated Contact Weld Monitor
• 1-out-of-n Selection Scheme
• Coil Read-back Security
• Build-in Local/Remote Switch
• All Outputs configured as Controlled Double Points (T/C)
• Contact Rating 10 Amp@110 Vdc
• Fixed Output Configuration
• Integrated Field Termination Terminals
• 500 kBaud Fiber Optic CAN Interface
• CANOpen compliant Device Profile
• Separate Panel Mount LC-Display
• 2 Module mountable in one 3U Bin
• Rugged Mechanical Design
• 19 Inch Frame Mountable

Datasheet

 HCM1620 Datasheet (771 Kb)